How to clean a roof

There is only one way to clean your roof.  Of course, we have different levels of dirty roofs. Some may just be stained with mold, and others may have a ton of algae.

Cleaning just a moldy roof can be very easy. As we all know, mold can be killed in seconds with regular household bleach. However, household bleach is just not strong enough. Please see how to making roof cleaner

Now, many homeowners and contractors believe using a power washer is the answer. This is simply not true. For starters, using a power washer on your roof could very easily rip your shingles right off.

Below is the pictures of all the roof granules that came off after a so called roof cleaner used a power washer to clean a roof that I had to replace.


In short, when a new roof is installed there is something on the backside of the shingle called sealing strips. These strips heat up from the sun, yes even in the winter, and seal each shingle to the next. Thus preventing the shingle from lifting up in high winds. So, using a pressure washer would be the way to easy to separate that seal, allowing the water to get right under the shingle. Needless to say that shingle will fly right off your roof. Not to mention using a pressure washer you will remove most of the very important granular s (small stones) that make up a shingle.


The best way to clean a roof is to use a roof cleaning chemical and let it sit for awhile. With most good cleaners that’s all you need to do. Just spray it on and leave it. It will rinse off the next time it rains.

Here’s how I do it.

I mix up my cleaner in a bug sprayer container and spray it all over the roof. This can be done either while walking the roof or some hi-tech equipment I have – I can actually spray it from the ground without ever getting on the roof. But of course, if the roof is really bad I may have to walk the roof with a power washer, but set at very low pressure, about 400 psi about 12 inches away.

If you’re hiring a professional.

Always get references. Preferably from people who have had their roofs cleaned a month plus ago. This way, you will know if the contractor caused/created leaks in your house.

What do you use?

Roof Sparkle has the answers on how to clean a roof and clean it without damaging your roof. And the best part without using any pressure whatsoever. How they do not sell their product on the open market as of yet. Roof Sparkle comes in for the day and kills all that nasty stuff on your roof. Now, kills is the keyword here. Once the mold is dead it’s removed. Instead of just moving it around with a so-called power washer that their competition uses Roof Sparkle kills and simply rinses it off while also killing all the algae in the gutters.

Coming very soon. I’m almost done writing an Ebook on where to buy the chemical used and how to mix it and apply it. As well as on how to start your own roof cleaning business.

Read how to make it yourself.  The goods


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top