3 way switch with pilot light

Report
Question

Please briefly explain why you feel this question should be reported .

Report
Cancel

Dom,

How do you wire a Slater 685, 3 way switch with pilot light?  This switch is used with another 3 way switch without a pilot light.  On the 685, with the toggle on the bottom, on the lower left there 2 screws and one on the other (right) side of the toggle.  There is one screw on both sides of the pilot light on the top of the switch.  I have 2 black wires with one being the common, 1 red wire, and 2 white wires at the box. Can you tell the correct wires to be attached to the appropriate screws?

 

Thank you.

DaveW

in progress 0
davew 4 years 1 Answer 1274 views 0

Answer ( 1 )

  1. Please briefly explain why you feel this answer should be reported .

    Report
    Cancel

    Hi, no not at all, You’ll have to test and search them out one by one. Then watch my video how to install a three way.

    https://www.askmediy.com/how-to-wire-a-3-way-switch-with-video/

Leave an answer

Browse
Browse

Choose from here the video type.

Put here the video id : https://www.youtube.com/watch?v=sdUUx5FdySs Ex: 'sdUUx5FdySs'.