Report
Question
Can I “Piggy Back” two adjacent sub-panels
I have an existing sub-panel fed by 60 amp, 220 breaker on main panel. I need to add 20A, 220v but the sub-panel does NOT have space for a double breaker. I want to add an additional sub-panel immediately adjacent ...

Please briefly explain why you feel this question should be reported.

Report
Cancel
  1. Dominick Amorosso
    0
    Report

    Please briefly explain why you feel this answer should be reported.

    Report Cancel
in progress 0
9 years 1 Answer 1051 views
0

Report
Question
Hey Dominic. Thanks for the video. I have a few questions. 1. The experts who installed my system didn't put a shutoff valve on each of the zones. The only valve in the line is the zone valve that receives the ...

Please briefly explain why you feel this question should be reported.

Report
Cancel
  1. Dominick Amorosso
    0
    Report

    Please briefly explain why you feel this answer should be reported.

    Report Cancel
in progress 0
9 years 3 Answers 912 views
0

Report
Question
Hello. I think my electrician didn't run heavy enough wire for a long 20 amp circuit. From the breaker box he ran #10 Romex for the first leg of the circuit. The first leg runs into an underground 1 inch ...

Please briefly explain why you feel this question should be reported.

Report
Cancel
  1. Dominick Amorosso
    0
    Report

    Please briefly explain why you feel this answer should be reported.

    Report Cancel
in progress 0
9 years 1 Answer 692 views
0

Report
Question
Hi I am going to install AFCI breakers in my Square D breaker box and the problem is the neutral wires for all the circuits are cut off to go into the neutral buss at the top of the box ...

Please briefly explain why you feel this question should be reported.

Report
Cancel
  1. Dominick Amorosso
    0
    Report

    Please briefly explain why you feel this answer should be reported.

    Report Cancel
in progress 0
9 years 1 Answer 617 views
0

Report
Question
Hi, There are many type of metal holide bulb in the store for example 150 W or 200 W or 400 W. I have a question: What is the voltage of that bulb? 220 or 110 Thank you Kevin

Please briefly explain why you feel this question should be reported.

Report
Cancel
  1. Dominick Amorosso
    0
    Report

    Please briefly explain why you feel this answer should be reported.

    Report Cancel
in progress 0
9 years 1 Answer 598 views
0

Report
Question
I am remodeling a 5th wheel into a tiny home... the carpet was attached with a TON of small staples. Is there an easier way to remove these.. it is not a tack strip they are small staples and a ...

Please briefly explain why you feel this question should be reported.

Report
Cancel
  1. Dominick Amorosso
    0
    Report

    Please briefly explain why you feel this answer should be reported.

    Report Cancel
    removing staples from flooring
closed 0
9 years 1 Answer 544 views
0

Report
Question
Stand alone oven replace. Stovetop separate (later). Old stove was hard wired with home power wires.
Thanks for reviewing. I have a new oven unit, just an oven,no stove top range. The stove top range is separate on the kitchen counter. My question is: The old stove - the home power supply was wired directly into the ...

Please briefly explain why you feel this question should be reported.

Report
Cancel
  1. Dominick Amorosso
    0
    Report

    Please briefly explain why you feel this answer should be reported.

    Report Cancel
    removing staples from flooring
in progress 0
9 years 5 Answers 1323 views
0

Report
Question
I just ripped up carpeting from my dining room. It was in very bad condition. I am looking for an inexpensive fix. It is a wood floor also in very bad condition . Would contact paper work?

Please briefly explain why you feel this question should be reported.

Report
Cancel
  1. Dominick Amorosso
    0
    Report

    Please briefly explain why you feel this answer should be reported.

    Report Cancel
    removing staples from flooring
solved 0
9 years 1 Answer 505 views
0

Report
Question
I have 220 volt added a sub panel with 220 volt Breaker, for compressor which is 2hp 12 amps,how to wire it to my main panel.

Please briefly explain why you feel this question should be reported.

Report
Cancel
  1. Dominick Amorosso
    0
    Report

    Please briefly explain why you feel this answer should be reported.

    Report Cancel
    removing staples from flooring
in progress 0
9 years 1 Answer 579 views
0